|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bell
System/AT&T Standards
|
| MODULAR JACKS | ||
|---|---|---|
| 725A | Modular Jack | For surface mounting on baseboard or wall surface |
| 725S | Modular Jack with cover | Surface-mounted jack protected against dust and moisture |
| 725SA | Flush Jack with Cover | Mounts flat against hollow wall for attractive appearance |
| 630B | Wall Telephone Jack | Mounts on wall surface to accept any modular wall telephone |
| 730A | Phone mount | Allows quick installation of a wall phone near an existing modular outlet |
| Z625WP4 | Outdoor Modular Jack | Weatherproof jack for exposed locations outside the home |
| 115A | Modular Jack with Electrical Faceplate | Combines modular jack with an existing electrical outlet |
| MODULAR CONVERTERS |
||
| 725C | Modular Jack Converter | Converts hard-wired connection block to modular jack |
| 725T | Modular Jack Converter with Cover | Converts hard-wired connection block to modular jack |
| 725F | Flush Jack Converter | Converts hard-wired flush outlet to modular jack |
| 225A | Portable 4-Prong Adapter | Converts 4-prong outlet to modular jack |
| 1A | Permanent 4-Prong Adapter | Permanently converts 4-prong outlet to modular jack |
| 732B | Line Cord Converter | Converts any hard-wired or 4-prong telephone to modular |
| PREWIRE PRODUCTS |
||
| 725FS | Prewire Flush Jack | Installs quickly in any home pre-wired for telephones |
| 830A | Prewire Wall Phone Jack | Installs quickly in any home pre-wired for telephones |
| 65B | Prewire Faceplate | Conceals unused station-wire boxes in pre-wired homes |
| WIRE JUNCTIONS |
||
| 742A | Wire Junction with Plug | Plugs into interface, connects up to four station wires in different parts of the home |
| 742B | Wire Junction | Connects to station wire, accepts up to three more station wires in different parts of the home |
| MODULAR ACCESSORIES |
||
| 267A2 | Dual Outlet Adapter | plugs into any modular jack to connect a telephone and an accessory |
| 733A | Dual Outlet Adapter for a Wall Phone | Plugs into any modular wall-phone jack to connect an accessory |
| 267D | Dual Line Adapter | Combines two lines into one jack for use with a two-line phone |
| 460A | Modular Coupler | Joins two modular line cords to create a long cord |
| 700A4 | Telephone Wire Plug | Adapts station wire to provide a modular connection |
| Z100A | Radio Interference Filter | Suppresses noise from AM radio signals |
| G6 | Volume Control Handset | Handset with variable volume control to amplify sound |
| CS34A | Line Status Indicator | Provides visual indication of telephone line in use |
| 191C | Wall Phone Backboard | Covers area around wall phone to provide more attractive appearance |
| Z153CM | Single Line Set Connector | Connects any modular telephone to a PBX or key system |
| TOOLS AND MATERIALS |
||
| 953A | Telephone Wire Stripper | Multi-purpose tool strips wire, installs staples, removes wire channel tabs in jacks |
| 953B | Telephone Line Tester with Wire Slitter | Multi-purpose tool does all of the above and checks for correct installation |
All original material on this web site is copyrighted ©1997 - ©2005 by David Massey.